JML-100 Vertical Colloid Mill

JML-100 vertical colloid mill is making of stainless steel or half of stainless steel. Vertical means that there is vertical motor with gear grinding and the motor is installed vertically.

Classification of Colloid Mill

1. According to Structure: there are Vertical Colloid Mill and Split Colloid Mill

2. According to Angle of Appearance: there are Ordinary Colloid Mill and Sanitary Colloid Mill

Live Demonstration of Colloid Mill

Structure of JML-100 Vertical Colloid Mill

The main structures of colloid mill are grinding parts, the base transmission department and dedicated motor. The dynamic and still millstones in the core part and mechanical seal parts are the most key parts. Therefore, according to the different natures of the materials, the selection must be different.

Usages of JML-100 Vertical Colloid Mill

Colloid mill is mainly used in the food industry, chemical industry, pharmaceutical industry, daily industry, building industry, papermaking industry, plastic industry, etc. Its structure is made by grinding the head piece, the base drive and Special motor.

Characteristics of JML-100 Vertical Colloid Mill

1.This Colloid Mill has such merit as follows: Well-designed, simple operation, low noise, easy servicing, small in size, corrosion resisting, wide-range use etc.
The main parts of this machine are made of high grade stainless steel which is nonpoisonous and corrosion-proof.
2.All critical parts of this machine are processed precisely with advanced technique. The annular clearance may be micro-adjusted by means of adjusting mechanism and an index dial is prepared. This mechanism can be easily controlled and the quality of products will be ensured satisfactorily.
3.According to the different use, the different materials and hardness of grinders can be easily assembled or disassembled and cleared.
4.This machine runs very smoothly and steadily.

Technical parameters of Colloid Mill

Model		JML-50		JML-80	JML-100	JML-120	JMF-80	JMF-100	JMF-120	JMF-140	JMF-180
Emulsification fineness um （single cycle or multi-cycle）		5~40		3~40	2~40	2~40	3~40	2~40	2~40	2~40	2~40
Adjustment range mm		1-0.01		1-0.01	1-0.01	1-0.01	1-0.01	1-0.01	1-0.01	1-0.01	1-0.01
Output t/h change according to materials			0.01-0.2	0.3-1	0.5-2	0.7-3	0.3-1	0.5-2	0.7-3	1-4	2-5
Motor	Power kw		1.1	3	5.5	7.5	4	5.5	7.5	11	15
	Pressurev		380	380	380	380	380	380	380	380	380
	Stirring speed r/min		2880	2880	2880	2880	2880	2880	2880	2880	2880
Grinding diameter mm			∮50	∮80	∮100	∮120	∮80	∮100	∮120	∮140	∮180
Discharge port diameter （時）			∮15	∮25	∮32	∮40	∮25	∮32	∮40	∮40	∮65
Cooling water pipe （時）			∮1/8〞	∮1/4〞	∮1/4〞	∮1/4〞	∮1/4〞	∮1/4〞	∮1/4〞	∮1/4〞	∮1/4〞
Dimensions	Length mm		420	520	560	560	640	750	750	820	980
	Width mm		280	400	420	420	550	620	620	700	800
	Height mm		760	900	950	950	1030	1080	1080	1250	1550
Weight kg			45	84	113	135	210	275	295	325	450

Notes:

1. The technical parameters of colloied mill in the chart are standard configuration. Any specific requirements, please let us know.

2. JML-50 is experimental colloid mill, also can be changed to 220V voltage.

3. The process parameters that need provided when choosing the Colloid Mill: the nature of material, working pressure, temperature, specific requirements, etc.