Falling-film Concentrator

Rising-film concentrator is the new product researched and developed by our factory on the basis of referring to the same products from home and abroad. It simplifies the operation procedure and is used for the heat sensitive solution containing water or organic solvents and enrichment of low suspended fluid.

Usages of Falling-film Concentrator

This concentrator is especially suitable for the plant extracts of the pre-concentration of low concentration, fruit juice and milk, beer, alcohol, such as the concentration of organic products.

Component part of Falling-film Concentrator

The falling film concentrator is mainly composed of a shell and tube heater efficiency, evaporation chamber, and concentrator, condensation cooler, vacuum of solvent recovery tank.

Structure of Falling-film Concentrator

Characteristics of Falling-film Concentrator

1, the material is by the column tube into the upper and the material distribution device evenly into each root canal and form a thin film along the tube surface. By dividing wall heat transfer, material to boiling, boiling gas drive liquid high-speed flow down, into the vapors liquid separator, the product is able to concentrate.

2, heat transfer coefficient has been further improved, material residence time is shorter, and evaporation temperature is lower.